Ideal for removing medium and fine ferrous contaminants from a
range of dry free flowing products. They are widely used in food
industry and chemical industry. Magnetic bars inside housing emit
high magnetic field across the gaps between them. When material
flows into the top of the housing, it is forced to cascade in a
zig-zag pattern from row to row over the magnetic tubes, which
ensures maximum tramp metal captured since the product comes in
direct and repeated contact with a magnet as it travels through the
Magnetic drawer are constructed by a group of Magnetic grates and
housing. It would be one layer or multiple layers inside the
housing which depend on the material condition. Usually, it is
installed into the pipeline. So mounting way have to be decided by
1. Finishing: Fine polishing and well welding to meet food grade.
2. Material: All the frames and housing are stainless steel SS304
and SS316 with seamless steel tube
3. Magnet: High strength rare-earth Magnet.
- Working Temperature: Standard working temperature is under 80
Degree C. High temperature up to 350 degree C can be offered on
request to meet special applications
5. Type of mounting: Either flange or quick release clamp are
decided by customer
6. As rare earth magnets are extremely powerful and tramp metal is
very difficult to remove by hand. We are ready to offer you an
easy-clean design drawer magnet.
7. Customer designs, specifications can be fulfilled.
Products are of dry powder and granular, while contaminants are
relatively small and fine.
How to do cleaning?
Drawer Magnets should be cleaned periodically for the most
efficient performance. To clean the magnetic tubes, release the
latch first and open the door. Remove the grate assemblies one at a
time. Remove the tramp metal by hand. Use extreme caution and wear
gloves during the process.
How to select our products?
Please advise us the above necessary information to make inquiry,
like dimension, magnetic strength, stable working temperature,
number of grate layers, connecting.
If you are not in a position to offer all these information and
need our professional suggestions, please fill in the table on the
last page with the application environment and material condition.